KTM 390 Adventure - Owner's Manual > Tampering warning

Safety advice / Tampering warning

Tampering with the noise control system is prohibited. Federal law prohibits the following acts or the causing thereof:

1. The removal or rendering inoperative by any person other than for purposes of servicing, repair, or replacement, of any device or element of design incorporated into any new vehicle for the purpose of noise control prior to its sale or delivery to the ultimate purchaser or while it is in use, or

2. the use of the vehicle after such device or element of design has been removed or rendered inoperative by any person.

Among those acts presumed to constitute tampering are the acts listed below:

1. Removal or puncturing of the main silencers, baffles, header pipes or any other components which conduct exhaust gases.

2. Removal or puncturing of parts of the intake system.

3. Lack of proper maintenance.

4. Replacing moving parts of the vehicle, or parts of the exhaust system or intake system, with parts other than those specified by the manufacturer.

Safe operation

Danger: Danger of accidents

A rider who is not fit to ride poses a danger to him or herself and others.

Danger: Danger of poisoning

Exhaust gases are toxic and inhaling them may result in unconsciousness and death.

Warning: Danger of burns

Some vehicle components become very hot when the vehicle is operated.

Only operate the vehicle when it is in perfect technical condition, in accordance with its intended use, and in a safe and environmentally compatible manner.

An appropriate driver's license is needed to ride the vehicle on public roads.

Have malfunctions that impair safety promptly eliminated by an authorized KTM workshop.

Adhere to the information and warning labels on the vehicle.

Protective clothing

Warning: Risk of injury

Missing or poor protective clothing presents an increased safety risk.

In the interest of your own safety, KTM recommends that you only operate the vehicle while wearing protective clothing.

Work rules

Unless specified otherwise, the ignition must be turned off during all work (models with ignition lock, models with remote key) or the engine must be at a standstill (models without ignition lock or remote key).

Special tools are necessary for certain tasks. The tools are not a component of the vehicle, but can be ordered using the number in parentheses. Example: bearing puller (15112017000) During assembly, use new parts to replace parts which cannot be reused (e.g. self-locking screws and nuts, expansion screws, seals, sealing rings, O-rings, pins, and lock washers).

In the case of certain screws, a screw adhesive (e.g. Loctite) is required. Observe the manufacturer's instructions.

If thread locker (e.g., Precote) has already been applied to a new part, do not apply any additional thread locker.

After disassembly, clean the parts that are to be reused and check them for damage and wear. Change damaged or worn parts.

After completing a repair or service work, check the operating safety of the vehicle.

Environment

If you use your motorcycle responsibly, you can ensure that problems and conflicts do not occur. To protect the future of the motorcycle sport, make sure that you use your motorcycle legally, display environmental consciousness, and respect the rights of others.

When disposing of used oil, other operating and auxiliary fluids, and used components, comply with the laws and regulations of the respective country.

Because motorcycles are not subject to the EU regulations governing the disposal of used vehicles, there are no legal regulations that pertain to the disposal of an end-of-life motorcycle. Your authorized KTM dealer will be glad to advise you.

Owner's Manual

It is important that you read this Owner's Manual carefully and completely before making your first trip. The Owner's Manual contains useful information and many tips on how to operate, handle, and service your motorcycle.

Only then will you find out how to customize the vehicle ideally for your own use and how you can protect yourself from injury.

Keep the Owner's Manual in an accessible place to enable you to refer to it as needed.

If you would like to know more about the vehicle or have questions on the material you read, please contact an authorized KTM dealer.

The Owner's Manual is an important component of the vehicle and must be handed over to the new owner if the vehicle is sold.

The Owner's Manual is also available for download from your authorized KTM dealer and on the KTM website.

International KTM Website: http://www.ktm.com

See also:

 KTM 390 Adventure - Owner's Manual > Consumer rights

Warranty claims must be submitted to an authorized KTM workshop. If you are not satisfied, please contact: KTM North America, Inc., Customer Support, 1119 Milan Ave., Amherst, OH 44001, USA Phone: (440) 985-3553 www.ktmusa.com KTM Canada, Inc., Customer Support, 8701 Rue Samuel‑Hatt, Chambly, QC J3L 6V4, Canada Phone: (450) 441-4451 www.ktmcanada.com Different rights may apply, according to national or regional legislation.

 KTM 390 Adventure - Owner's Manual > Important notes, View of vehicle

Owner's Manuals

Service manuals