Kawasaki Z400 - Service manual > Seats

Rear Seat Removal

• Insert the ignition key [A] into the seat lock.
• Turn the key clockwise, and pull up the front part of rear seat [B]
• Remove the rear seat forward.

Rear Seat Installation

• Insert the rear seat tabs [A] to the slots [B] on the frame.
• Insert the seat lock projection [C] into the latch hole [D].
• Push down the front part of the mar seat until the lock clicks.

Front Seat Removal

• Remove the mar seat (see Rear Seat Removal).
• Pull up the rear part of front seat [A] while pulling the Beat lock cable backward.
•  Remove the front seat

Front Seat Installation

• Check that the dampers [A] are in place.

• Insert the front seat tabs  [A] to the bracket [B].
• Insert the seat lock projection [C] into the latch hole [D].
• Push down the rear part of the front until the lock clicks.
• Install the rear seat (see Rear Seat Installation).

Pillion Seat Cover Removal (Equipped Models)

• Insert the ignition key [A] into the seat lock.
• Turn the key clockwise, and pull up the front part of pillion seat cover [B]
• Remove the pillion seat cover backward.

Pillion Seat Cow Installation (Equipped Models)

• When installing the pillion seat cover bracket [A], note the following.
• Install: Damper [B] Bracket Bolts Nuts [C]
• Tighten the bolts following the specified tightening sequence [1 - 2].
• Check that the dampers [A] are in place.

Insert the dot [A] m the pillion seat cover into the damper PI.

Insert the seat lock projection [C] into the latch hole [D].

Push down the front part of the pillion seat cover until the lock clicks .

See also: