Benelli Imperiale 400 - Owner's Manual > Running In

For driving a new motorcycle in its first 1,000 km way, the engine should not be over revved and all the gears shall not be over 80% of red zone engine rpm; don't operate the throttle under a fully open position; change the gears in time to keep the engine rpm in reasonable range. It is strongly suggested to use the motorcycle very carefully during its running in period; also the rider has to be familiar to the performance.

Note: In the first 300 km of break in, you should examine the cleanliness of the engine oil frequently. Check the oil level of engine oil before driving.

Inspection before Driving

Please check on the following contents which are very important before driving,

Handlebar

1. Stable
2. Turn smoothly
3. No sliding or loose

Braking

1. Right clearance of the lever and brake pedal
2. No sponge feeling

Tire

1. Appropriate air pressure
2. Appropriate tire treads depth
3. No crack or cut

Fuel Level

• Sufficient fuel for the driving

Light

• Operate all the lamps - headlight, taillight, stoplight, instrument-panel light and city light.

Indicator Lamp

• High beams indicator lamp, gear Indicator light, and turning indicator.

Horn & Brake Switch

• Horn & Brake Switch

Engine Oil

• Correct oil level

Throttle

1. Appropriate free play in clutch lever
2. Smooth operation

Clutch

1. Appropriate free play in throttle cable
2. Smooth operation, no stuck when returning to full close position

Driving Chain

1. Appropriate tightness
2. Appropriate lubrication

See also: