BMW F900XR - Owner's Manual > Cruise-control system

- with cruise control OE

Display when adjusting settings (Speed Limit Info not active)

The symbol 1 for cruise control is displayed in the Pure Ride view and the top status line.

Display when adjusting settings (Speed Limit Info active)

The symbol 1 for cruise control is displayed in the Pure Ride view and the top status line.

Switching on cruise control

• Slide switch 1 to the right.

  Button 2 is operational.

Setting road speed

• Briefly push button 1 forward.

Adjustment range for cruise control

• 30...210 km/h

The motorcycle maintains your current cruising speed and the setting is saved.

Accelerating

• Briefly push button 1 forward.

  Speed is increased by 1- 2 km/h each time you push the button.

• Push button 1 forward and hold it in this position.

  The motorcycle accelerates smoothly.

  The current speed is maintained and saved if button 1 is not pushed again.

Decelerating

• Briefly push button 1 back.

  The speed is reduced by 1- 2 km⁄h each time you push the button.

• Push button 1 back and hold it in this position.

  The motorcycle decelerates smoothly.

  The current speed is maintained and saved if button 1 is not pushed again.

Deactivating cruise control

• Brake, pull the clutch lever or turn the throttle grip (close the throttle by turning the grip back past the idle position) to deactivate cruise control.

  Indicator light for cruise control goes out.

Resuming former cruising speed

• Briefly push button 1 back to return to the speed saved beforehand.

NOTICE Opening the throttle does not deactivate the cruise-control system.

If you release the twistgrip the motorcycle will decelerate only to the cruising speed saved in memory, even though you might have intended slowing to a lower speed.

Indicator light for cruise control lights up.

Switching off cruise control

• Slide switch 1 to the left.

  The system is deactivated.

  Button 2 is disabled.

Shift light

Switching gearshift light on and off

• Navigate to Settings, Vehicle settings.
• Switch Shift light on or off.

Setting shift light

• Switch on the Shift light function.
• Navigate to Settings, Vehicle settings, Configuration (under Shift light).

  The following settings are available:

  • Start RPM
  • End RPM
  • Brightness
  • Frequency. A flashing frequency of 0 Hz corresponds to steady light.

Changes to brightness and the flashing frequency are demonstrated by the shift light with it briefly lighting up or flashing.

See also: